Material Handling
Material Handling
BLACK DRAGON
N2533
I.D.
3/4″ – 1.1/2″
W.P.
21 bar 300 psi
Temp.
-40°C to +175°C (205°C intermittent) -40°F to +350°F (400°F intermittent
Application.
- Delivery hose for the transfer of hot tar and asphalt.
- Ideal for use as a wand hose or crack sealer melter and applicator
Download Technical Data Sheet
Flexitube
N2496
I.D.
4″
W.P.
150 psi
Temp.
-20°F to +180°F
Application.
- High-Grade Abrasion Resistant and Static Conductive SBR/NR
- Single High T ensile T extile Braid
- Goodall N2496 Flexitube Dry Cement 100 PSI Max W .P .
Download Technical Data Sheet
Frac Hose 400 PSI
N2865
I.D.
3″- 4″
W.P.
400 psi
Temp.
Application.
- The user is advised that this product is designed to transfer non-petroleum based liquids and solids. The use of this hose for any other purpose without prior approval in writing by Lewis- Goetz and Co. voids all warranties either expressed or implied.
- As a result of Lewis-Goetz and Co.’s continuous effort towards product improvement, Lewis- Goetz and Co reserves the right to make product improvements without prior notification. These changes include text of the branding.
- The bend radius is intended to be used solely as a guide. Because there are a variety of factors that impact the bend radius of a discharge hose, the end user is advised to insure the hose is not kinked in service.
- To maximize service life drain hose after every use. Hose should be inspected prior to each use and periodically hydrostatically tested.
Download Technical Data Sheet
Ruffian S & D
N1450
I.D.
2″ – 3″
W.P.
1000 – 2000 psi
Temp.
-40°F to 268°F For Air Service Only -40°F to 180°F For Oil Service
Application.
- Neoprene
- High Tensile Wire Braids
- Goodall N1253 Work Over Rig Liquid Service 2000 PSI Max W.P.
- Air/Gas Service 1000 PSI Max W.P.
Download Technical Data Sheet
Wear King
N2498
I.D.
3″- 4″
W.P.
75 psi
Temp.
-20°F to +180°F
Application.
- Discharge of sand, pebble lime or other highly abrasive dry materials
- 1⁄4 inch thick tube to ensure a longer hose life
- Conductive tube to ensure safe handling
Download Technical Data Sheet
Work Over Rig
N1253
I.D.
2″ – 3″
W.P.
1000 – 2000 psi
Temp.
-40°F to 268°F -40°F to 180°F
Application.
- 1000 PSI Max W.P. Air/Gas
- 2000 PSI Max W.P. Liquid
- -40°F to 268°F For Air Service Only -40°F to 180°F For Oil Service
Download Technical Data Sheet